SenseCAP Solar Node P1-Pro

915MHz

$119.00

Most orders ship within 1-2 business days. We stand behind every product — contact us if you're not satisfied.

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.

Check the product description for included accessories and device compatibility details.

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.

Refer to the product description for full specs including wattage, capacity, dimensions, and compatibility.

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.

SenseCAP Solar Node P1-Pro

$119.00

The SenseCAP Solar Node P1-Pro is a solar-powered Meshtastic/MeshCore node designed for long-term outdoor deployment. It comes with everything you need to get set up right out of the box, including four 18650 batteries, a GPS module, and pre-flashed and configured with your firmware of choice.

Mount it on a pole or wall to extend your mesh network's range and reliability. The integrated 5W solar panel keeps the batteries topped off, and the nRF52840-based radio draws minimal power, so this node can run indefinitely in most environments with as little as an hour of sunlight per day.

The P1-Pro supports communication ranges up to 9km in open areas and can function as either a standalone node or a repeater to relay messages across your mesh. Built-in GPS provides real-time positioning, making it a solid option for remote area tracking and outdoor operations.

A Grove expansion port lets you connect environmental sensors (temperature, humidity, air quality) for remote monitoring applications.

Atlavox ships your solar node pre-flashed with the latest firmware — no assembly, flashing, or configuring required.

Key Features

✅ Solar Powered — 5W integrated solar panel with four 3,350mAh 18650 batteries for 24/7 operation
✅ Built-in GPS — XIAO L76K module with GPS, GLONASS, and Galileo support for real-time positioning and time-keeping
✅ Long Range — Up to 9km in open areas
✅ Meshtastic/MeshCore Ready — Pre-flashed with either Meshtastic or MeshCore firmware, no setup required
✅ Bluetooth 5.0 — Connect to the free Meshtastic or MeshCore app on your phone for configuration and messaging, or deploy it as a standalone repeater without needing to connect to your phone
✅ Low Power — nRF52840 processor optimized for energy efficiency
✅ Expandable — Grove port (I2C/GPIO) for plug-and-play sensor modules
✅ Outdoor Rated — includes pole and wall mounting brackets
✅ USB-C Charging — Charge via solar or USB-C when not deployed
✅ FCC & CE Certified

Specifications

Main Controller	XIAO nRF52840 Plus (ARM Cortex-M4, 64MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash)
LoRa Module	Wio-SX1262 (Semtech SX1262)
TX Power	Up to +22 dBm
Frequency Range	862–930 MHz
GPS Module	XIAO L76K (GPS / GLONASS / Galileo)
Connectivity	Bluetooth 5.0, USB-C
Solar Panel	5W integrated
Battery	4× 18650 lithium-ion (3,350mAh each, button-top)
Charging	Solar + USB-C
Operating Temp (discharge)	-40°C to 60°C
Charging Temp	0°C to 50°C
Antenna	2dBi rubber rod (868–915MHz), RP-SMA connector
Expansion	Grove port (I2C / GPIO)
Mounting	Pole mount (70–100mm diameter) and wall mount brackets included
Certifications	FCC, CE, RoHS
Manufacturer	Seeed Studio

What's in the Box

SenseCAP Solar Node P1-Pro
4× 18650 batteries (pre-installed)
RP-SMA antenna of your choice
Antenna cable (RP-SMA Male to RF-SMA Female)
Mounting brackets and hardware (pole + wall mount)
USB-C cable

Use Cases

Mesh Network Expansion — Deploy as a solar repeater to fill coverage gaps and relay messages between nodes
Off-Grid Communication — Text and GPS in areas with no cell service
Outdoor Tracking — Real-time GPS positioning for remote operations, farms, parks, trails
Environmental Monitoring — Connect Grove sensors for temperature, humidity, and air quality data
Emergency Preparedness — Set-and-forget solar node for resilient off-grid comms